Fiamma Awning Kit Rain Guard Van (F45S or F35 Pro)

Only 1 left
Part Number
J43081
OEM Part Number
98655-947
In Stock
Hurry, Only 1 left in stock
Now $227.88 Was $253.20
You Might Be Interested In
Nobody likes an annoying drip! If you've investing in a Fiamma awning then you might find that you suffer with water ingress during wet weather.The gap between the awning case and the vehicle can allow water to fall next to the door of your vehicle - partricularly during heavier showers.The Fiamma Rain Guard - Van is designed to rectify this. Supplied as a 3m length it can be cut down to size for smaller awnings. Made specifically for use with the F45 and F35 Fiamma range - although it could potentially be indicated with other vehicle types (please carefully check your measurements if intending to use in this way).Supplied with a cleaning wipe and pre-fixed adhesive strips for a water tight seal - the rain guard is simple to fit (although you may find that it is easier to negotiate with a second pair of hands!)Top Tip- if you find that you have off cuts due to requiring a smaller length use this to offer up against your awning and establish the best angle for fitting.If you have the Fiamma F45 or F35 Pro awning, this rain guard can be fitted between the van and the awning case box to stop rain penetrating into the awning.
This creates a rain guard between the van and either the F45 or F35 pro awnings. Length 3.00m and Width 110 mm but can be cut shorted if needed.