Part of the VW community since 1989
Change Store
Change Store
English (AU)
English (GB)
02 9645 7660
Toggle Nav
Account
Basket
Menu
Change Store
Change Store
English (AU)
English (GB)
Account

Hall Sender for T25 1979–1992

Only 3 left
Part Number
J10729
OEM Part Number
034998065
In Stock
Hurry, Only 3 left in stock
main product photo
$43.20
Wishlist
You Might Be Interested In
  1. Distributor Cap for Beetle, T2 Bay and T25
    Distributor Cap for Beetle, T2 Bay and T25
    $60.50
    In Stock
  2. Ignition Leads Set VW T25 1900cc 1983 1984
    Ignition Leads Set VW T25 1900cc 1983–1984
    $67.40
    In Stock
  3. Distributor Cap for VW T25 1984–1992
    Distributor Cap for VW T25 1984–1992
    $19.95
    Rating:
    80%
    (1)
    In Stock
  4. Distributor VW T25 2.1 Ltr 1986-1991
    Distributor VW T25 2.1 Ltr 1986-1991
    $159.00
    In Stock
  5. Rotor Arm for T25 models 1979–1992
    Rotor Arm VW T25 2100cc (Not DJ code) 1985–1992 VW T4 2000cc 1990-2003
    $26.00
    Rating:
    100%
    (1)
    In Stock
  6. Rotor Arm for VW Beetle, VW T2 Bay and 1900cc and 2000cc VW T25
    Rotor Arm for VW Beetle, VW T2 Bay and 1900cc and 2000cc VW T25
    $27.40
    In Stock
  7. Ignition Lead Set VW T25 1900,2100cc 1984-1992
    Ignition Lead Set VW T25 1900,2100cc 1984-1992
    $112.00
    In Stock
  8. Ignition Lead and Spark Plug Set VW T25 1900/2100cc Watercooled 1985-1992
    Ignition Lead and Spark Plug Set VW T25 1900/2100cc Watercooled 1985-1992

    From $32.32 Was $34.00

    To $138.73 Was $146.00

    Rating:
    100%
    (1)
    In Stock
Fits all petrol VW T25s from 1979 to 1992. Located inside the distributor unit. Please Note: when fitting you may need to re-use the connector from your old unit.
A vital part of the vehicle electronic ignition system on T25, the hall sender gives the signal to the coil which in turn generates a spark. A faulty or malfunctioning sensor will prevent your van from running. Located inside the distributor unit, it fits all petrol T25s 1979–1992. Please note, when fitting you may need to re-use the connector from your old unit.